Samsung · Washer
Samsung Washer UE / UB Error Code: Unbalanced Load — How to Fix
Also shown as: UB, Ub, U6, E4, 1 Ub
UE (or UB) means the drum is unbalanced, so the washer stopped spinning to protect itself. Usually it is one heavy item, a tangled load, or a washer that is not level. Redistribute the laundry and level the feet — no parts needed in most cases.
What UE means
During spin, the washer detected that the weight in the drum is not evenly distributed and stopped (or reduced) the spin for safety. Ur is different: it only means the washer is retrying to rebalance and is not a fault.
Likely causes (most → least common)
- Laundry bunched or tangled on one sideMost common
Sheets wrapping other items or wet clothes clumping cause the drum to wobble.
- A single heavy or bulky itemCommon
Bath mats, one large towel or a comforter alone are hard to balance. Samsung suggests adding two or three towels.
- OverloadingCommon
Too much laundry for the selected cycle prevents even distribution. Samsung India suggests 3 kg or less for bedding covers.
- Washer not level or not stableCommon
All four feet must touch the floor firmly; a rocking machine trips the balance sensor.
- Worn suspension / shock absorbersRare
If UE appears with small, balanced loads on a level machine, the suspension components may be worn.
How to fix it, step by step
Pause and redistribute the load
Pause, open the door once it unlocks, untangle the laundry and spread it evenly around the drum. Close the door and press Start.
Balance single heavy items
If you are washing one bulky item, add two or three towels, or remove items if the drum is overloaded. Check the maximum load for the cycle in your manual.
Level the washer
Unplug the washer. Check that all four feet touch the floor and that it does not rock. Turn the adjustable front feet (clockwise / counter-clockwise depending on model) and tighten the lock nuts. Leave some space to adjacent walls (Samsung India suggests about 10 cm).
Drain if the door stays locked
If the door stays locked with water inside, run a drain/spin-only program with the spin speed set to 'no spin' so the water can pump out, then redistribute.
When to call a professional
- UE appears with normal, balanced loads on a level washer.
- The washer bangs loudly, walks across the floor or the drum sits visibly lower on one side (possible suspension failure).
- You smell burning or the drum will not turn by hand when empty.
Parts that may be involved
Always match the part to your exact model number. Buttons below are placeholders until affiliate partnerships are approved.
Shock absorbers / dampers (model-specific)
Worn dampers on front-loaders let the drum move too much and trigger repeated UE codes.
Fit: Replace as a set; match your model number.
No price shown — prices are only listed when verified on a retailer page.
Suspension rods (top-loaders)
Worn suspension rods on top-loaders cause wobble and UB.
Fit: Usually sold as a set of four.
No price shown — prices are only listed when verified on a retailer page.
Anti-vibration pads
Optional: can help on smooth or uneven floors.
Fit: Universal fit.
No price shown — prices are only listed when verified on a retailer page.
Related codes
FAQ
Is UB the same as UE on a Samsung washer?
Yes. Samsung lists UE, UB (Ub), U6 and E4 as unbalanced-load codes on different models.
Why does my washer show UE with only one item?
A single heavy item cannot be balanced in the drum. Add two or three towels of similar weight and restart the spin.
What does Ur mean?
Ur means the washer is adding water and trying to rebalance before spinning again. It lengthens the cycle but is not an error.
Sources
This guide paraphrases the manufacturer's own support documentation. We re-check sources regularly.
- Samsung washing machine information and error codes — Samsung US (last checked 2026-11-18)
- My Samsung washing machine is showing a UE code during a spin cycle — Samsung UK (last checked 2026-11-18)
- How to fix UE / UB error in Samsung washing machine — Samsung India (last checked 2026-11-18)
- Samsung washing machine error codes — Samsung Philippines (last checked 2026-11-18)