LG · Dishwasher
LG Dishwasher OE Error Code: Not Draining — Causes & Fixes
Also shown as: Water Outlet Error
OE means your LG dishwasher could not drain the water out of the tub. Most of the time it is a clogged filter, a kinked drain hose under the sink, or a blocked air gap or garbage-disposal connection — all DIY-friendly.
What OE means
LG calls OE a 'water outlet error': after a wash phase, water was still in the tub when the dishwasher expected it to be gone. LG says it most often comes from food clogs or an installation problem with the drain hose.
Likely causes (most → least common)
- Clogged filter or food debris in the sumpMost common
Food residue and small objects collect in the mesh filter at the bottom of the tub.
- Kinked or crushed drain hoseCommon
Items stored under the sink can press on the drain hose (usually white or grey, corrugated).
- Blocked air gap or garbage-disposal inletCommon
Debris in the sink-top air gap, or a clogged disposal, stops water leaving.
- Knockout plug not removed (new install)Common on new installs
If OE appears on the very first cycle after a new dishwasher or new disposal, the disposal's knockout plug may still be in place.
- Drain hose installed out of specOccasional
LG specifies a maximum hose length of 12 ft (3.6 m), no extensions, and the hose end 12–40 inches above the floor.
- Frozen drain hoseRare
Possible in unheated spaces.
- Failed drain pumpRare
If filter, hose and air gap are clear and OE returns, a part may be faulty.
How to fix it, step by step
Turn off the dishwasher and remove debris
Switch the unit off, pull out the lower rack and remove visible food or objects from the bottom of the tub.
Clean the filter
Twist the mesh filter counter-clockwise to remove it, scrub it under running water with a soft brush, then refit and turn clockwise until it clicks. Watch for sharp edges on stainless filters.
Straighten the drain hose
Open the cabinet under the sink, move stored items away from the drain hose and straighten any kinks.
Clean the air gap
If your sink has an air gap, lift off the cover and cap and clear debris with a toothpick or small brush. LG suggests flushing it with hot water using a turkey baster.
Force a drain and test
Use your model's CANCEL & DRAIN button combination if it has one. Otherwise start a cycle, let it run about 45 seconds (the first part of every cycle is drain-only) and switch off. Then run an empty Normal or Heavy cycle to test.
New install? Check the knockout plug
If OE appeared on the first cycle after installing a new dishwasher or disposal, the disposal knockout plug probably needs removing — a job for the installer or a plumber.
When to call a professional
- OE keeps returning after the filter, drain hose and air gap have been cleaned and checked.
- You hear the drain pump humming but no water leaves (possible pump failure or blockage inside the sump).
- Water is leaking onto the floor or into the cabinet.
Parts that may be involved
Always match the part to your exact model number. Buttons below are placeholders until affiliate partnerships are approved.
Drain pump (model-specific)
Replaces a pump that no longer moves water out of the tub.
Fit: Match your exact model number (label on the edge of the door or tub).
No price shown — prices are only listed when verified on a retailer page.
Filter assembly
Replace a cracked or deformed filter that lets debris into the pump.
Fit: Model-specific.
No price shown — prices are only listed when verified on a retailer page.
Drain hose
Replace a cracked or permanently kinked hose.
Fit: Do not extend beyond LG's 12 ft maximum.
No price shown — prices are only listed when verified on a retailer page.
Related codes
FAQ
Can I run my LG dishwasher with an OE error?
It will keep stopping until the drain problem is cleared. Clean the filter and check the hose first, then run an empty cycle to confirm it drains.
Why did OE appear on a brand-new LG dishwasher?
LG says OE on the first cycle usually means an installation issue: a kinked, too-long or too-high drain hose, or a disposal knockout plug that was not removed.
How often should I clean the filter?
LG's own guidance for some models is weekly or every two weeks; regular cleaning prevents OE and odours.
Sources
This guide paraphrases the manufacturer's own support documentation. We re-check sources regularly.
- OE Error Code - Dishwasher — LG USA Support (last checked 2026-11-18)
- How to Fix an LG Dishwasher That Is Not Draining (OE Error) — LG USA Support (last checked 2026-11-18)
- LG Dishwashers – Troubleshooting an OE Error Code — LG USA Support (last checked 2026-11-18)