Maytag · Washer

Maytag Washer Sud Code: Excess Suds — What to Do

Also shown as: SUD, Sd

Sud

Sud or Sd on a Maytag washer means it detected too many suds and is running a suds-reduction routine — let it continue. It is caused by too much or the wrong detergent, or detergent build-up, not by a broken part.

Easy⏱ 0–90 minUpdated 2026-11-18

What Sud means

Maytag says the washer has sensed excessive suds in the drum and automatically starts a routine to clear them, which can make the cycle longer.

Likely causes (most → least common)

  1. Too much HE detergentMost common

    HE detergents come in 2x, 4x and 8x concentrations; dose by the detergent maker's instructions for soil level and load size.

  2. Non-HE detergentVery common

    Regular detergent foams far more.

  3. Oversized detergent pacs on small loadsCommon

    Maytag says larger pre-measured pacs are meant only for large or heavily soiled loads.

  4. 'No splash' / 'easy-pour' chlorine bleachOccasional

    Maytag says their thickening agent can create excess suds.

  5. Detergent build-up in the washerOccasional

    Residue from earlier overdosing keeps foaming.

  6. Restricted drain hoseOccasional

    Whirlpool, Maytag's parent company, notes a restricted drain hose or standpipe can also produce Sud codes on its front-loaders.

How to fix it, step by step

  1. Let the routine run

    Don't cancel: the washer is removing the suds itself.

    Easy⏱ 10–30 min🔧 No tools
  2. Correct the dose

    Use HE detergent and follow the label dose for your load; use small pacs for small loads.

    Easy⏱ 2 min🔧 No tools
  3. Switch bleach

    If you use thickened 'no splash' bleach, switch to regular liquid chlorine bleach.

    Easy⏱ —🔧 No tools
  4. Clean out residue

    Run the washer empty (or with a washer cleaner such as affresh®, which Maytag mentions) before the next load. Maytag recommends cleaning the washer about once a month, more often with hard water or heavy use.

    Easy⏱ 1 h🔧 No tools
  5. Check level and drain hose

    Maytag says to keep the washer level and avoid overloading; also check the drain hose is not kinked or clogged.

    Easy⏱ 10 min🔧 Spirit level

When to call a professional

  • Sud appears again with the correct HE dose and a clean washer.
  • The washer does not drain at all after the suds routine.
  • Water leaks from the washer.

Parts that may be involved

Always match the part to your exact model number. Buttons below are placeholders until affiliate partnerships are approved.

HE laundry detergent

Low-sudsing detergent designed for HE washers.

Fit: Any HE-labelled detergent.

No price shown — prices are only listed when verified on a retailer page.

Washer cleaner tablets

Remove detergent residue during an empty cleaning cycle.

Fit: Check suitability for your washer type.

No price shown — prices are only listed when verified on a retailer page.

Related codes

FAQ

Is Sud an error on my Maytag washer?

It is a suds warning. The washer runs a suds-reduction routine automatically — let it continue.

Why does Sud keep appearing?

Usually detergent: too much, the wrong type, oversize pacs, thickened bleach, or residue in the washer. Run an empty cleaning cycle and reduce the dose.

How often should I clean my Maytag washer?

Maytag recommends about once a month, more often with hard water or frequent use.

Sources

This guide paraphrases the manufacturer's own support documentation. We re-check sources regularly.